English (United States) 
English (India) 
Deutsch (Deutschland) 
简体中文(中国) 
Español (España) 
English (South Africa) 
English (Singapore) 
Français (France) 
English (Australia) 
English (United Kingdom) 
Offset Link
Accessories
The HYTORC Offset Link provides an extension for HYTORC Square drive tools allowing operators to tighten bolts that are difficult or impossible to reach with limited overhead clearance or nearby obstructions. The Offset Link also work great where bolts protrude above the nut where standard sockets won’t fit. The Offset Link provides interchangeable cartridges that allow the links to be quickly interchanged in the field to fit different size nuts. The HYTORC Offset link delivers accurate torque from the square drive tool to the fastener to minimize operator error and improve safety.
Low Clearance Access
The Offset Link provides a convenient low-profile extension that allows square-drive tools to reach bolts that are otherwise difficult to access because of obstructions. The links essentially allow the square drive tool to function as a low-clearance tool thereby eliminating the need for additional tooling. This bolting configuration is ideal for tightening fasteners with protruding bolts.Tool Compatibility
The Offset Link is compatible with all HYTORC Hydraulic, Pneumatic and Electric Torque tools. The Offset Link comes in two basic drive types compatible with either ¾” and 1” square drives. The torque multiplication factor for each cartridge is clearly marked; simply multiply the factor by the desired torque and set the torque on the tool for accurate and repeatable bolting operations.Interchangeability
The Offset Link provides an interchangeable cartridge system that allows the user to easily change out cartridges in the field to accommodate a range of hex sizes. The Offset Link is compatible with the HYTORC Washer which eliminates bending and side load while increasing the safety and speed of all bolting operations.Documentation
OL MODEL
ZOL MODEL
ZOL-DS MODEL
OL TYPE – STANDARD MODEL
- Compatible with HYTORC Torque Tools with ¾" or 1" square drives
- Cartridge with 12-Point hex pattern
- Includes reaction arm
ZOL TYPE – WASHER MODEL
- Compatible with HYTORC Torque Tools with ¾" or 1" square drives
- Cartridge with 12-Point hex and Washer pattern
- Does not require use of a reaction arm
ZOL-DS TYPE – DOUBLE WASHER MODEL
- Compatible with HYTORC Torque Tools with ¾" or 1" square drives
- Cartridge pattern with double washer pattern and internal 12-point hex
- Does not require use of a reaction arm.
Imperial
Metric
| OFFSET LINK 1 CARTRIDGE ASSEMBLY - 3/4" SQUARE DRIVE | OL MODEL - IMPERIAL OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ARM | |
| FROM | TO | ||||||||
| 1 | 9/16" | 1-1/4" | 1.46 | 4.86 | 1.17" | 8.07" | 4.22" | 1.25" | 5.38" |
| 2 | 1-5/16" | 1-7/16" | 1.30 | 4.99 | 1.27" | 8.30" | 4.22" | 1.25" | 5.38" |
| 3 | 1-1/2" | 1-5/8" | 1.20 | 5.07 | 1.36 | 8.47 | 4.22" | 1.25" | 5.38" |
| 4 | 1-11/16" | 1-13/16" | 1.12 | 5.16 | 1.47" | 8.67" | 4.22" | 1.25" | 5.38" |
| 5 | 1-7/8" | 2" | 1.05 | 5.28 | 1.60" | 8.92" | 4.22" | 1.25" | 5.38" |
| 6 | 2-1/16" | 2-3/16" | 0.99 | 5.45 | 1.76" | 9.25" | 4.22" | 1.25" | 5.38" |
| 8 | 2-1/4" | 2-3/8" | 0.90 | 5.57 | 1.87" | 9.48" | 4.22" | 1.25" | 5.38" |
| 9 | 2-7/16" | 2-9/16" | 0.86 | 5.67 | 1.96" | 9.67" | 4.22" | 1.25" | 5.38" |
| OFFSET LINK 3 CARTRIDGE ASSEMBLY - 1" SQUARE DRIVE | OL MODEL - IMPERIAL OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ARM | |
| FROM | TO | ||||||||
| LR1.56 | - | 1-3/4" | 1.62 | 7.23 | 1.65" | 11.63" | 6.50" | 1.67" | 8.00" |
| 1 | 1-1/4" | 2" | 1.52 | 7.37 | 1.77" | 11.89" | 6.50" | 1.67" | 8.00" |
| 2 | 2-1/16" | 2-3/16" | 1.39 | 7.42 | 1.84" | 12.01' | 6.50" | 1.67" | 8.00" |
| 3 | 2-1/4" | 2-3/8" | 1.33 | 7.48 | 1.90" | 12.13" | 6.50" | 1.67" | 8.00" |
| 4 | 2-7/16" | 2-9/16" | 1.22 | 7.67 | 2.09" | 12.51" | 6.50" | 1.67" | 8.00" |
| 5 | 2-5/8" | 2-3/4" | 1.15 | 7.73 | 2.20" | 12.68" | 6.50" | 1.67" | 8.00" |
| 6 | 2-13/16" | 2-15/16" | 1.10 | 7.86 | 2.27" | 12.88" | 6.50" | 1.67" | 8.00" |
| 7 | 3" | 3-1/8" | 1.06 | 7.92 | 2.33" | 13.00" | 6.50" | 1.67" | 8.00" |
| 9 | - | 3-1/4" | 0.97 | 8.17 | 2.58" | 13.50" | 6.50" | 1.67" | 8.00" |
| 10 | - | 3-1/2" | 0.93 | 8.36 | 2.88" | 13.99" | 6.82" | 1.67" | 8.00" |
| OFFSET LINK 1 CARTRIDGE ASSEMBLY - 3/4" SQUARE DRIVE | OL MODEL - METRIC OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ARM | |
| FROM | TO | ||||||||
| 1 | 17mm | 32mm | 1.46 | 4.86 | 30mm | 205mm | 107mm | 32mm | 137mm |
| 2 | 32mm | 36mm | 1.30 | 4.99 | 32mm | 211mm | 107mm | 32mm | 137mm |
| 3 | - | 41mm | 1.20 | 5.07 | 35mm | 215mm | 107mm | 32mm | 137mm |
| 4 | - | 46mm | 1.12 | 5.16 | 37mm | 220mm | 107mm | 32mm | 137mm |
| 5 | - | 50mm | 1.05 | 5.28 | 41mm | 227mm | 107mm | 32mm | 137mm |
| 6 | - | 55mm | 0.99 | 5.45 | 45mm | 235mm | 107mm | 32mm | 137mm |
| 8 | - | 60mm | 0.90 | 5.57 | 48mm | 241mm | 107mm | 32mm | 137mm |
| 9 | - | 65mm | 0.86 | 5.67 | 50mm | 246mm | 107mm | 32mm | 137mm |
| OFFSET LINK 3 CARTRIDGE ASSEMBLY - 1" SQUARE DRIVE | OL MODEL - METRIC OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ARM | |
| FROM | TO | ||||||||
| LR1.56 | - | - | 1.62 | 7.23 | 42mm | 295mm | 165mm | 42mm | 203mm |
| 1 | 32mm | 50mm | 1.52 | 7.37 | 45mm | 302mm | 165mm | 42mm | 203mm |
| 2 | - | 55mm | 1.39 | 7.42 | 47mm | 305mm | 165mm | 42mm | 203mm |
| 3 | - | 60mm | 1.33 | 7.48 | 48mm | 308mm | 165mm | 42mm | 203mm |
| 4 | - | 65mm | 1.22 | 7.67 | 53mm | 318mm | 165mm | 42mm | 203mm |
| 5 | - | 70mm | 1.15 | 7.73 | 56mm | 322mm | 165mm | 42mm | 203mm |
| 6 | - | 75mm | 1.10 | 7.86 | 58mm | 327mm | 165mm | 42mm | 203mm |
| 7 | - | 80mm | 1.06 | 7.92 | 59mm | 330mm | 165mm | 42mm | 203mm |
| 9 | - | 85mm | 0.97 | 8.17 | 66mm | 343mm | 165mm | 42mm | 203mm |
| 10 | - | - | 0.93 | 8.36 | 73mm | 355mm | 173mm | 42mm | 203mm |
| OFFSET LINK 1 CARTRIDGE ASSEMBLY - 3/4" SQUARE DRIVE | ZOL MODEL - IMPERIAL OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| 1 | 9/16" | 1-1/4" | 1.46 | 4.86 | 1.17" | 8.07" | 4.22" | 1.43" | |
| 2 | 1-5/16" | 1-7/16" | 1.30 | 4.99 | 1.27" | 8.30" | 4.22" | 1.43" | |
| 3 | 1-1/2" | 1-5/8" | 1.20 | 5.07 | 1.36 | 8.47 | 4.22" | 1.43" | |
| 4 | 1-11/16" | 1-13/16" | 1.12 | 5.16 | 1.47" | 8.67" | 4.22" | 1.45" | |
| 5 | 1-7/8" | 2" | 1.05 | 5.28 | 1.60" | 8.92" | 4.22" | 1.45" | |
| 6 | 2-1/16" | 2-3/16" | 0.99 | 5.45 | 1.76" | 9.25" | 4.22" | 1.45" | |
| 8 | 2-1/4" | 2-3/8" | 0.90 | 5.57 | 1.87" | 9.48" | 4.22" | 1.45" | |
| 9 | 2-7/16" | 2-9/16" | 0.86 | 5.67 | 1.96" | 9.67" | 4.22" | 1.52" | |
| OFFSET LINK 3 CARTRIDGE ASSEMBLY - 1" SQUARE DRIVE | ZOL MODEL - IMPERIAL OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| LR1.56 | - | 1-3/4" | 1.62 | 7.23 | 1.65" | 11.63" | 6.50" | - | |
| 1 | 1-1/4" | 2" | 1.52 | 7.37 | 1.77" | 11.89" | 6.50" | 1.87" | |
| 2 | 2-1/16" | 2-3/16" | 1.39 | 7.42 | 1.84" | 12.01' | 6.50" | 1.87" | |
| 3 | 2-1/4" | 2-3/8" | 1.33 | 7.48 | 1.90" | 12.13" | 6.50" | 1.87" | |
| 4 | 2-7/16" | 2-9/16" | 1.22 | 7.67 | 2.09" | 12.51" | 6.50" | 1.94" | |
| 5 | 2-5/8" | 2-3/4" | 1.15 | 7.73 | 2.20" | 12.68" | 6.50" | 1.94" | |
| 6 | 2-13/16" | 2-15/16" | 1.10 | 7.86 | 2.27" | 12.88" | 6.50" | 1.95" | |
| 7 | 3" | 3-1/8" | 1.06 | 7.92 | 2.33" | 13.00" | 6.50" | 1.95" | |
| 9 | - | 3-1/4" | 0.97 | 8.17 | 2.58" | 13.50" | 6.50" | 2.21" | |
| 10 | - | 3-1/2" | 0.93 | 8.36 | 2.88" | 13.99" | 6.82" | 2.21" | |
| OFFSET LINK 1 CARTRIDGE ASSEMBLY - 3/4" SQUARE DRIVE | ZOL MODEL - METRIC OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| 1 | 17mm | 32mm | 1.46 | 4.86 | 30mm | 205mm | 107mm | 36mm | |
| 2 | 32mm | 36mm | 1.30 | 4.99 | 32mm | 211mm | 107mm | 36mm | |
| 3 | - | 41mm | 1.20 | 5.07 | 35mm | 215mm | 107mm | 36mm | |
| 4 | - | 46mm | 1.12 | 5.16 | 37mm | 220mm | 107mm | 36mm | |
| 5 | - | 50mm | 1.05 | 5.28 | 41mm | 227mm | 107mm | 37mm | |
| 6 | - | 55mm | 0.99 | 5.45 | 45mm | 235mm | 107mm | 37mm | |
| 8 | - | 60mm | 0.90 | 5.57 | 48mm | 241mm | 107mm | 37mm | |
| 9 | - | 65mm | 0.86 | 5.67 | 50mm | 246mm | 107mm | 39mm | |
| OFFSET LINK 3 CARTRIDGE ASSEMBLY - 1" SQUARE DRIVE | ZOL MODEL - METRIC OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| LR1.56 | - | - | 1.62 | 7.23 | 42mm | 295mm | 165mm | 47mm | |
| 1 | 32mm | 50mm | 1.52 | 7.37 | 45mm | 302mm | 165mm | 47mm | |
| 2 | - | 55mm | 1.39 | 7.42 | 47mm | 305mm | 165mm | 47mm | |
| 3 | - | 60mm | 1.33 | 7.48 | 48mm | 308mm | 165mm | 49mm | |
| 4 | - | 65mm | 1.22 | 7.67 | 53mm | 318mm | 165mm | 49mm | |
| 5 | - | 70mm | 1.15 | 7.73 | 56mm | 322mm | 165mm | 50mm | |
| 6 | - | 75mm | 1.10 | 7.86 | 58mm | 327mm | 165mm | 50mm | |
| 7 | - | 80mm | 1.06 | 7.92 | 59mm | 330mm | 165mm | 50mm | |
| 9 | - | 85mm | 0.97 | 8.17 | 66mm | 343mm | 165mm | 56mm | |
| 10 | - | - | 0.93 | 8.36 | 73mm | 355mm | 173mm | 50mm | |
| OFFSET LINK 1 CARTRIDGE ASSEMBLY - 3/4" SQUARE DRIVE | ZOL-DS MODEL - IMPERIAL OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| 1 | 9/16" | 1-1/4" | 1.46 | 4.86 | 1.17" | 8.07" | 4.22" | - | |
| 2 | 1-5/16" | 1-7/16" | 1.30 | 4.99 | 1.27" | 8.30" | 4.22" | - | |
| 3 | 1-1/2" | 1-5/8" | 1.20 | 5.07 | 1.36 | 8.47 | 4.22" | - | |
| 4 | 1-11/16" | 1-13/16" | 1.12 | 5.16 | 1.47" | 8.67" | 4.22" | - | |
| 5 | 1-7/8" | 2" | 1.05 | 5.28 | 1.60" | 8.92" | 4.22" | - | |
| 6 | 2-1/16" | 2-3/16" | 0.99 | 5.45 | 1.76" | 9.25" | 4.22" | - | |
| 8 | 2-1/4" | 2-3/8" | 0.90 | 5.57 | 1.87" | 9.48" | 4.22" | - | |
| 9 | 2-7/16" | 2-9/16" | 0.86 | 5.67 | 1.96" | 9.67" | 4.22" | - | |
| OFFSET LINK 3 CARTRIDGE ASSEMBLY - 1" SQUARE DRIVE | ZOL-DS MODEL - IMPERIAL OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| LR1.56 | - | 1-3/4" | 1.62 | 7.23 | 1.65" | 11.63" | 6.50" | - | |
| 1 | 1-1/4" | 2" | 1.52 | 7.37 | 1.77" | 11.89" | 6.50" | 2.04" | |
| 2 | 2-1/16" | 2-3/16" | 1.39 | 7.42 | 1.84" | 12.01' | 6.50" | 2.04" | |
| 3 | 2-1/4" | 2-3/8" | 1.33 | 7.48 | 1.90" | 12.13" | 6.50" | 2.07" | |
| 4 | 2-7/16" | 2-9/16" | 1.22 | 7.67 | 2.09" | 12.51" | 6.50" | 2.21" | |
| 5 | 2-5/8" | 2-3/4" | 1.15 | 7.73 | 2.20" | 12.68" | 6.50" | 2.21" | |
| 6 | 2-13/16" | 2-15/16" | 1.10 | 7.86 | 2.27" | 12.88" | 6.50" | 2.23" | |
| 7 | 3" | 3-1/8" | 1.06 | 7.92 | 2.33" | 13.00" | 6.50" | 2.23" | |
| 9 | - | 3-1/4" | 0.97 | 8.17 | 2.58" | 13.50" | 6.50" | - | |
| 10 | - | 3-1/2" | 0.93 | 8.36 | 2.88" | 13.99" | 6.82" | - | |
| OFFSET LINK 1 CARTRIDGE ASSEMBLY - 3/4" SQUARE DRIVE | ZOL-DS MODEL - METRIC OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| 1 | 17mm | 32mm | 1.46 | 4.86 | 30mm | 205mm | 107mm | - | |
| 2 | 32mm | 36mm | 1.30 | 4.99 | 32mm | 211mm | 107mm | - | |
| 3 | - | 41mm | 1.20 | 5.07 | 35mm | 215mm | 107mm | - | |
| 4 | - | 46mm | 1.12 | 5.16 | 37mm | 220mm | 107mm | - | |
| 5 | - | 50mm | 1.05 | 5.28 | 41mm | 227mm | 107mm | - | |
| 6 | - | 55mm | 0.99 | 5.45 | 45mm | 235mm | 107mm | - | |
| 8 | - | 60mm | 0.90 | 5.57 | 48mm | 241mm | 107mm | - | |
| 9 | - | 65mm | 0.86 | 5.67 | 50mm | 246mm | 107mm | - | |
| OFFSET LINK 3 CARTRIDGE ASSEMBLY - 1" SQUARE DRIVE | ZOL-DS MODEL - METRIC OUTLINE DIMENSIONS | ||||||||
| CARTRIDGE | HEX SIZE | FACTOR | OFFSET | RADIUS | LENGTH | WIDTH | HEIGHT | ||
| FROM | TO | ||||||||
| LR1.56 | - | - | 1.62 | 7.23 | 42mm | 295mm | 165mm | - | |
| 1 | 32mm | 50mm | 1.52 | 7.37 | 45mm | 302mm | 165mm | 52mm | |
| 2 | - | 55mm | 1.39 | 7.42 | 47mm | 305mm | 165mm | 52mm | |
| 3 | - | 60mm | 1.33 | 7.48 | 48mm | 308mm | 165mm | 53mm | |
| 4 | - | 65mm | 1.22 | 7.67 | 53mm | 318mm | 165mm | 56mm | |
| 5 | - | 70mm | 1.15 | 7.73 | 56mm | 322mm | 165mm | 56mm | |
| 6 | - | 75mm | 1.10 | 7.86 | 58mm | 327mm | 165mm | 57mm | |
| 7 | - | 80mm | 1.06 | 7.92 | 59mm | 330mm | 165mm | 57mm | |
| 9 | - | 85mm | 0.97 | 8.17 | 66mm | 343mm | 165mm | - | |
| 10 | - | - | 0.93 | 8.36 | 73mm | 355mm | 173mm | - | |
